1/8/2018 Titled and labelled 10x24” fl green rectangle: “metabolic colloquium”. Updated Artspan website.
1/9/2018 Glued two bent 6x6” black metal mesh squares to painted acrylic hemisphere with 12x12” green acrylic square, then glued twelve 3/4” acrylic disks, three short plastic tube sections, one short red cord section and two 1/8” white acrylic rod sections to sculpture.
1/10/2018 Glued one 1.5” and twi 0.75” acrylic disks to sculpture. Titled 10.5x24” opaque black acrylic rectangle sculpture: “a lack of a remembered present”.
1/11/2018 Labelled “a lack of a remembered present” sculpture. Updated Artspan website.
1/14/2018 Drilled nine small holes in 5” yellow acrylic disk.
1/15/2018 Glued nine holed 5” disk into painted acrylic hemisphere sculpture. Cut 36” black acrylic 1/8” rod into three sections and glued into sculpture.
1/16/2018 Cut 36” orange acrylic 1/8” rod into three sections and glued into painted acrylic hemisphere sculpture.
1/17/2018 Cut 36” green acrylic 1/8” rod into three sections and glued into painted acrylic hemisphere sculpture along with 3/4” acrylic disk.
1/20/2018 Glued copper fixture, short clear pvc tube section, miniature book and blue plastic disk to painted acrylic hemisphere sculpture.
1/25/2018 Cut 36” white 1/8” acrylic rod into four sections. Attached three miniature lights to painted acrylic hemisphere sculpture.
1/29/2018 Attached 6x6” Al and Cu mesh squares to painted acrylic hemisphere sculpture.
1/30/2018 Glued mesh squares in place.
2/2/2018 Glued two 12” colored 3/8” acrylic tubes, four white 1/8” acrylic rod sections, three 1.25” acrylic disks and three 3/4” acrylic disks to painted acrylic hemisphere sculpture.
2/3/2018 24” blue plastic string around painted acrylic hemisphere sculpture. Sculpture is probably done. Need title.
2/6/2018 Signed and dated sculpture.
2/7/2018 Took pictures of painted hemisphere sculpture. Uploaded sculpture to Artspan website.
2/9/2018 Glued three colored 3/8” acrylic 12” tubes to 12x12” yellow acrylic square. Glued three more 3/8” acrylic tubes to yellow square to form pyramid. Cut 11x12” black metal mesh section.
2/11/2018 Cut and shaped metal mesh section around one face of pyramid tube sculpture.
2/14/2018 Glued 4” white acrylic disk and six sections of 1/8” orange and gold acrylic rod to pyramid tube sculpture.
2/15/2018 Glued five sections of 1/8” red acrylic rod to pyramid tube sculpture. Later, glued eight sections of 1/8” blue acrylic rod and one 1/25” green acrylic disk to sculpture.
2/20/2018 Wired and glued two irregular shaped black wire mesh sections and six red plastic string sections to pyramid tube sculpture.
2/22/2018 Put silver metal mesh bead and blue plastic string section into 1.25” clear acrylic box and wrapped with black metal mesh section, then glued to pyramid tube sculpture. Also glued 3/4” red acrylic disk , irregular black metal mesh section and 3/8” red cord section to sculpture. Shaped black metal mesh section and green Al foil section into 80mm clear acrylic sphere.
2/24/2018 Inserted 6x6” yellow origami mesh paper into 80mm acrylic sphere and put sphere into interior of pyramid tube sculpture then glued five 12” acrylic 3/8” tubes to sculpture.
2/26/2018 Glued two 3/8” acrylic tubes to pyramid tube sculpture.
2/28/2018 Cut 36” orange 1/8” acrylic rod into three sections and glued onto triangle shape. Cut four green, five black and five white acrylic 1/8” rod sections and glued to tube triangle shape.
3/1/2018 Glued four sections of red 1/8” acrylic rod, 3.5x1”green origami mesh paper section and 2” frosted blue acrylic disk to tube triangle.
3/2/2018 Attached tube triangle and glued miniature book to pyramid tube sculpture. Sculpture is probably done. Broke “3 prism state” sculpture into many pieces. Started gluing back together.
3/3/2018 Continued gluing “3 prism state” sculpture.
3/4/2018 Glued 5” yellow acrylic disk, copper cap and crumpled black metal mesh section to “3 prism state” sculpture, for more support. Gluing is done.
3/7/2018 Signed and dated pyramid sculpture. Took pictures. Took pictures of repaired “3 prism state” sculpture.
3/10/2018 Titled painted acrylic hemisphere sculpture: “Australopithecus acrylica”. Labeled and
dated sculpture. Uploaded pyramid tube sculpture to Artspan website.
3/12/2018 Glued 9x12” white cardboard frame and 8x11” yellow cardboard frame to black 20x32” mat board.
3/13/2018 Cut and bent four rectangular black metal mesh sections and glued to black 20x32” mat board. Glued second 9x12” white cardboard frame to board.
3/14/2018 Wrote Artist statement for Artspan website. Cut 9x12” orange and yellow felt sheets into frames. Glued frames and remainders to 20x32” black mat board.
3/19/2018 Cut pink, yellow and white mesh cloth sections and glued to 20x32” black mat board.
3/20/2018 Cut and bent two black metal mesh sections, three 1/8” green acrylic rod sections and glued to 20x32” black mat board.
3/22/2018 Glued three 1/5” acrylic disks to 20x32” black mat board.
3/27/2018 Thread 36” blue, green, yellow and black plastic string through 12” clear 1/2” pvc tube section and then thread through bent copper fitting and glued to 20x32” black mat board.
3/28/2018 Glued green and blue cotton balls to 20x32” black mat board.
3/29/2018 Glued two miniature books to 20x32” black mat board. Artwork is probably done. Need title.
3/30/2018 Titled 20x32” black mat board artwork: “framing pose”. Signed, dated and labeled “framing pose”.
3/31/2018 Used heavy photo corners to connect black, green and blue plastic string on “framing pose” artwork. Took pictures.
4/3/2018 Glued two mac motherboards together with four prescription bottles.
4/4/2018 Attached USB and ethernet cables to motherboards.
4/7/2018 Glued two more prescription bottles to motherboard.
4/9/2018 Drilled two small holes in each of six prescription bottles on motherboard sculpture and thread red and green plastic string through bottles.
4/10/2018 Glued three 1.5” acrylic disks to three prescription bottles on motherboard sculpture.
4/11/2018 Bent and glued two 9x12” white mat frames to motherboard sculpture.
4/13/2018 Bent and shaped 21x16” black metal mesh section around motherboard sculpture.
4/14/2018 Glued black metal mesh and yellow mesh fabric sections onto motherboard sculpture. Also glued miniature book, two 3/4” and two 1.5” acrylic disks to sculpture. Artwork is probably done. Need title.
4/16/2018 Signed and dated blue acrylic disk and glued to motherboard sculpture. Took pictures. Uploaded to Artspan site.
4/21/2018 Titled motherboard sculpture: “prescription 1110001111”.
4/23/2018 Labeled “prescription 1110001111”.
4/26/2018 Cut 8 and 9 x 11” sections from black metal mesh roll.
4/27/2018 Fit 8x11” black metal mesh section into 8x10” wooden galley frame. Stapled into place. Thread 36” blue, yellow and green plastic string sections through frame mesh and stapled 9x10” black metal mesh section to other side of wooden frame, then thread white and purple plastic string through mesh sections.
4/29/2018 Thread blue and pink plastic string through metal mesh frame sculpture.
5/1/2018 Titled 3/2/2018 sculpture: “middle e glyph”. Thread dark green, dark blue and dark purple plastic string through metal mesh frame sculpture. Labeled “middle e glyph” sculpture.
Glued six 3/4” acrylic disks and one 1.5” disk to clear 8x10” acrylic sheet (new artwork).
5/2/2018 Thread black and yellow plastic string through metal mesh frame sculpture.
5/3/2018 Thread light green plastic string through metal mesh frame sculpture. Glued one 4” blue acrylic disk and three 1/8” acrylic rod sections (6” red and white & 9” red) to 8x10” clear acrylic sheet.
5/5/2018 Glued yellow plastic string and pink fabric mesh sections to 8x10” clear acrylic sheet.
5/7/2018 Glued second 8x10” clear acrylic sheet to 8x10” clear acrylic sheet anchoring art pieces between. Cut two 8x10” black metal mesh sections.
5/8/2018 Glued one 8x10” black metal mesh sections to 8x10” clear acrylic sheet sandwich with two green plastic triangles. Repaired broken “metabolic colloquium” sculpture. Glued second 8x10” black metal mesh section to other side of clear acrylic sheet sandwich with two orange plastic triangles.
5/10/2018 Inserted clear acrylic sandwich sculpture into 8x10” black metal gallery frame.
5/11/2018 Glued miniature book and 3/4” acrylic disk to acrylic sandwich sculpture. Sculpture is probably done.
5/12/2018 Repaired “spheres of installation” sculpture after wind blew it off stand. Glued four 6” exotic wood pen blocks to 8x10” wooden gallery frame.
5/13/2018 Glued 8x10” wooden and metal gallery frame sculptures together.
5/14/2018 Glued four 6x6” colored acrylic squares to dual frame sculpture.
5/15/2018 Glued two 4x4” black metal mesh sections to dual frame sculpture. Glued three3/4” acrylic disks, three amber plastic triangles and three green plastic triangles to corners of mesh squares on dual frame sculpture. Cut two 6x6” black metal mesh sections from roll.
5/16/2018 Glued two 6x6” black metal mesh sections to dual frame sculpture. Glued eight 3/4” acrylic disks to sculpture.
5/17/2018 Glued one blue plastic rectangle and one purple plastic square to dual frame sculpture.
5/19/2018 Glued two 6” red 1/8”acrylic rod sections to dual frame sculpture.
5/20/2018 Glued third 6” red 1/8” acrylic rod section to dual frame sculpture. Sculpture is probably done. Took pictures. Need title. Uploaded to Artspan.
5/22/2018 Glued 4” orange acrylic disk to 9x12” clear acrylic sheet.
5/23/2018 Glued five 3/4” acrylic disks to 9x12” clear acrylic sheet. Cut and glued three short sections of 1/8” red acrylic rod to 9x12” clear acrylic sheet.
5/26/2018 Cut and glued three short sections of 1/8” green acrylic rod to 9x12” clear acrylic sheet.
5/27/2018 Updated artistic statement with “titles” section.
5/30/2018 Glued two short green plastic string sections to 9x12” clear acrylic sheet.
6/3/2018 Inserted irregular black metal mesh section and 9x12” clear acrylic sheet artwork into 9x12” Al gallery frame.
6/4/2018 Glued 9x12” clear acrylic frame artwork and 9x12” irregular cut black, green and blue felt sections to 32x20” white mat board.
6/6/2018 Glued two short green plastic string sections to 32x20” white mat board. One bent four 5x5” opaque orange acrylic squares, two bent 6x6” transparent red acrylic square and two bent 24x24” clear acrylic sheet. Glued two one bent orange acrylic squares together.
6/7/2018 Glued orange acrylic box (from 6/6) to 32x20” white mat board.
6/8/2018 One bent 12” black and orange 3/8” acrylic tubes, one bent 36” green and yellow 1/8” acrylic rods. Glued one bent yellow 1/8” acrylic rod to 32x20” white mat board.
6/11/2018 Cut 12x24” and 24x36” sections from bronze metal mesh roll.
6/12/2018 Tore 32x20” white mat board six times then glued three 3x6” red origami paper mesh sections into three of the tears.
6/13/2018 Removed 9x12” Al frame artwork from 32x20” white mat board and replaced with 9x12” white mat board frame. Glued one bent 5x5” orange acrylic square to 9x12” Al frame artwork.
6/14/2018 Glued second one bent 5x5” orange acrylic square to 9x12” Al frame artwork. Set 32x20” torn white mat board artwork aside, it's not progressing. Cut 23x22” and 25x22” sections from black metal mesh roll.
6/15/2018 Cut 10x12” black metal mesh section, bent and inserted into back of 9x12” Al frame artwork.
6/20/2018 Glued two 12” acrylic 3/8” rods and three acrylic disks(2”, 1.5” and 3/4”) to 9x12” Al frame artwork. Glued 12” acrylic 1/2” blue tube to artwork too.
6/23/2018 Coiled red plastic string section and glued to maintain shape.
6/24/2018 Glued red string coil, four 3/4” acrylic disks and one miniature book to 9x12” Al frame artwork. Signed and dated 5/20/2018 to be titled artwork.
6/25/2018 Glued blue metal mesh bead, 12” smoky 1/2” acrylic tube and pink mesh fabric section to Al frame artwork. Sculpture is probably done. Tentatively titled 5/20/2018 artwork:”identity ambiguity”.
6/27/2018 Labeled “identity ambiguity” sculpture. Took pictures, uploaded to Artspan website.
7/6/2018 Ordered E6000 adhesive and steel springs from zoro.com.
7/8/2018 Glued nine various size cotton balls to 9x12” black mat board.
7/11/2018 Rec'd adhesive and springs from zoro.com.
7/15/2018 Glued green plastic string section to 9x12” black mat board. This month seems unfocused and uninteresting. Forcing any artwork?
7/18/2018 Glued five short sections of blue plastic string to 9x12” black mat board.
7/23/2018 Bent one 9x12” white mat board frame. Drilled four holes in another 9x12” white mat board frame, two holes in bent white mat board frame and four holes in 9x12” arted black mat board. Cut 36” orange 1/8” acrylic rod into four 9” sections and inserted into drilled holes of white and black mat boards to make 3D rectangle shape. Glued rod sections into place.
7/24/2018 Glued red and blue 6x6” origami mesh squares, eight 3/4” acrylic disks and one 1.5” acrylic disk to 9x12” black mat board sculpture.
7/25/2018 Glued orange and yellow 6x6” origami mesh squares to 9x12” black mat board sculpture.
7/30/2018 Glued four small cotton balls and three short blue plastic string sections to 9x12” black mat board sculpture.
7/31/2018 Glued four short blue plastic string sections and one 3/4” acrylic disk to pink metal mesh bead then glued bead and miniature book to 9x12” black mat board sculpture. Sculpture is probably done.
8/2/2018 Took pictures of 9x12” black mat board sculpture. Uploaded to Artspan website. Title: “story building”.
8/3/2018 Signed, dated and labeled “story building” sculpture.
8/7/2018 Titled 6/25/18 sculpture: “adumbrating laminations”.
8/8/2018 Signed, dated and labeled “adumbrating laminations” sculpture.
8/13/2018 Glued one bent 12”purple 3/8” acrylic tube (from 6/8/18) to two bent 24x24” clear acrylic sheet (from 6/6/18). Then glued one bent 12” orange 3/8” acrylic tube (also from 6/8/18) to the sheet.
8/17/2018 Started cutting 32 and 10mm holes in 9x12” black mat board.
8/23/2018 Drilled two 1/2” holes in both 9x12” black mat boards. Punches are not efficient for cutting holes in mat board.
8/24/2018 Drilled one 1.75” hole into two 9x12” black mat boards with circle saw (through 32mm holes).
8/27/2018 Glued one holed 9x12” black mat board, one 3” metal spring and a 3” and 4” section of 1/8” acrylic rod to two bent 24x24” clear acrylic sheet.
8/28/2018 Glued second holed 9x12” black mat board to 24x24” cleat acrylic sheet.
8/29/2018 Inserted four 12” colored acrylic tubes into four 1/2” holes in black mat boards on 24x24” two bent acrylic sheet.
8/30/2018 Glued four acrylic tubes in place. Cut 36” red 1/8” acrylic rod into four sections and glued two onto 24x24” two bent clear acrylic sheet. Also glued pink mesh fabric section to sheet.
8/31/2018 Glued two red 1/8” acrylic rod sections ,one black metal mesh bead and one 4” purple acrylic disk to two bent 24x24” clear acrylic sheet.
9/1/2018 Glued blue rectangle and diamond and orange triangle 2D shapes to 24x24” two bent acrylic sheet. Drilled ten small holes on sculpture too. Thread two yellow and two green 36” plastic string sections and two (blue & clear) 1/8” acrylic rod sections in sculpture.
9/3/2018 Drilled small hole in two 1.5” and three 0.75” acrylic disks then glued to 24x24” two bent acrylic sheet along with one red metal mesh bead.
9/4/2018 Glued five 1.5” acrylic disks, one 6x6” Al mesh square and one 4” yellow acrylic square to 24x24” two bent acrylic sheet.
9/5/2018 Thread orange 1/2” pvc tube section through 24x24” two bent acrylic sheet. Glued three 1/2” brass spheres and four 1/2” acrylic spheres to sculpture too.
9/6/2018 Glued two cotton balls and one 5” wooden square to 24x24” two bent acrylic sheet. Also glued orange pvc tube and miniature book to sculpture.
9/7/2018 Cut two 12.5x8.5” black metal mesh sections. Glued one section to 24x24” two bent acrylic sculpture with two 1.5” acrylic disks.
9/8/2018 Bent and glued second metal mesh section and 3” spring to 24x24” two bent acrylic sculpture.
9/10/2018 Cut and glued red and purple felt sections to 24x24” two bent acrylic sculpture.
9/11/2018 Cut 4” and 11” yellow felt circles then cut circles in half and glued to 24x24” two bent acrylic sculpture.
9/12/2018 Re-glued patio damaged “q73” sculpture. Cut 4” and 7” black wire mesh circles then cut in half and glued to 24x24” two bent acrylic sculpture.
9/13/2018 Cut 7” tic weave fabric circle and cut in half then glued to 24x24” two bent acrylic sculpture.
9/15/2018 Folded metal mesh section (from 9/7) and glued to 24x24” two bent acrylic sculpture with 3/4” acrylic disk. Added Jo Sonya marigold paint streaks to sculpture. Sculpture is probably done.
9/17/2018 Signed and dated 24x24” two bent acrylic sculpture. Took pictures. Titled: “foreshorten recapitulation”.
9/18/2018 Trouble uploading art to Artspan site. Labelled “foreshorten recapitulation” sculpture.
9/19/2018 Uploading problems continue.
9/23/2018 Uploading problems were mac platform not website. Resolved with antivirus software. Wrapped green felt section around 12x1.5” cardboard tube. Inserted 1x0.75” wooden rod sections into ends.
9/25/2018 Drilled three small holes into each of ten 6x6” red acrylic squares.
9/26/2018 Drilled three small holes into each of ten 6x6” blue acrylic squares.
Connected three blue and three red squares with three short sections of white 1/8” acrylic rod to make sectioned rectangle.
10/7/2018 Rejoined Linkened as artist/writer.
10/14/2018 Repaired broken “it doesn't have to be literature” sculpture with section of red pvc tubing.
10/19/2018 Took pictures of “it doesn't have to be literature, mod 1” sculpture. Bent two 9x12” white mat board frames and glued to 20x32” white mat board. Glued “pastels in black 2” from 9/15/14 and “pastels in grey” from 7/30/14 to bent mat frames.
10/22/2018 Glued wooden rod sections to green felt tube (from 9/23) then glued tube to 20x32” white mat board(from 10/19). Also bent 9x12” white mat frame and glued to “pastels in black” painting (from 9/15/14) and glued to board. Also glued 36” blue 1/8” acrylic rod and black metal mesh section to board.
10/24/2018 Cut 7” circle from black metal mesh roll, then glued circle, two 2” and two 3/4” acrylic disks and one blue bumpy bead to 20x32” white mat board.
10/26/2018 Ordered ART21, season 9 DVD from Ebay, online. Glued 5” wooden square, 5” orange acrylic square and two 1/2” acrylic cubes to 20x32” white mat board.
10/28/2018 Glued four 2” acrylic disks and one miniature book to 20x32” white mat board. Glued blue plastic string section to board too. “Painting” is probably done.
10/29/2018 Signed and dated 20x32” white mat board “painting”. Punched three holes along top of board.
10/30/2018 Took pictures 10/29 “painting”. Needs title. Uploaded to Artspan website.
11/5/2018 Rec'd ART21, season 9 DVD.
11/9/2018 20x32” white mat board “painting” tentatively titled “self assembly required”. Labeled painting.
11/19/2018 Cut three short sections of ½” green acrylic tubing then glued to 6x6” blue and red sectioned rectangle (from 9/26/18).
11/20/2018 Watched ART21, season 9, Johannesburg episode.
11/22/2018 Glued eight plastic 2D shapes to blue and red sectioned rectangle. Watched ART21, season 9, Berlin episode.
11/23/2018 Watched ART21, season 9, San Francisco episode.
11/24/2018 Cut 36” green & yellow 1/8” acrylic rod into three unequal sections each.
11/25/2018 Glued four of the acrylic rod sections to sectioned rectangle.
11/26/2018 Glued remaining two 1/8” acrylic rod sections to sectioned rectangle.
11/27/2018 Cut 36” yellow and white acrylic rod into three (yellow) and six (white) sections and glued to sectioned rectangle.
11/28/2018 Glued Formufit 4” flexible PVC elbow to 5” wooden square stack, then glued 4” yellow acrylic disk to elbow. Cut 1/8” purple acrylic rod into six sections and glued five sections to sectional rectangle.
11/29/2018 Glued two 5” wooden squares to 4” yellow acrylic disk on flexible elbow.
11/30/18 Glued flexible elbow with wooden stack as base for sectional rectangle. Glued two inch section of purple 1.5” PVC pipe to base along with two irregular metal mesh sections and purple metal mesh bead. Filled 1.5” acrylic cube with black glitter, glued shut with 4.5” section of green acrylic 1/2” tube then glued to top of purple pvc pipe section. Also glued 9v battery to base. Glued thin metal mesh section and 36” green plastic string to sculpture.
12/1/2018 Glued 36” black plastic string and two miniature books to sectional rectangle.
12/5/2018 Cut and bent 8x26” small metal mesh section and 8x12” 1/2” metal mesh section for sectional rectangle. Glued sections and 8x8” clear acrylic base to sectional rectangle. Also glued eight 2D plastic shapes, two bumpy beads, one 6” purple 1/8” acrylic rod section and one 9x12” white mat board frame to sculpture.
12/7/2018 Painted Jo Sonja's Geranium red grid patterns on sectional rectangle sculpture. Sculpture is probably done. Need title.
12/8/2018 Took pictures, signed and dated sectional rectangle sculpture.
12/9/2018 Uploaded sectional rectangle sculpture to ArtSpan website.
12/13/2018 Glued three bent 6x6” red acrylic square (from 6/15/28) and 1/2” acrylic cube to 12x12” green acrylic sheet.
12/14/2018 Glued twelve basswood stick sections to 12x12” green acrylic sheet. Purchased fifty black 2” and thirty white 2” acrylic disks and four 12x24” Caribbean acrylic sheets from Delvie's Plastics, online. Titled 12/7/18 sectional rectangle sculpture: “self portrait”. Labeled.
12/16/2018 Changed “self portrait” sculpture title to: “algorithmic portrait”.
12/17/2018 Changed “algorithmic portrait” sculpture title to “lieu portrait”.
12/18/2018 Received Delvie”s Plastics order.
12/19/2018 Experimented with bending two 36” purple and pink 1/8” acrylic rods using a metal water bottle and heat strip but could not get rod evenly heated to make circle or spiral. Produced five variously bent and broken sections.
12/20/2018 Drilled small holes into 2” black and white acrylic disks and 3/4” grey acrylic disk then glued to 12x12” green acrylic square along with five bent 1/8” acrylic rod sections (from 19).
12/26/2018 Curled green and white 36” plastic string sections into 1.5” clear acrylic cube then glued it to 1/2” acrylic cube and glued to 12x12” green acrylic square.
12/28/2018 Purchased “How to Play Piano” DVD from Great Courses, online and books: “Katarina Grosse” and “Artists and Their Books” from Alibris, online.
12//30/2018 Glued three 2” white acrylic disks to two 8” basswood sticks, then glued three 2” black acrylic disks to sticks. Purchased Kandinsky's “Circle in Circle”canvas print from Canvas Gallery, online.
12/31/2018 Glued third 8” wooden stick to disk and stick structure. Wound 36” blue and yellow plastic string through structure and glued to 12x12” green acrylic square.